version: 1 project: name: real-world-cad-release default_targets: [release_manifest] slots: requirements: { kind: file, path: fixtures/requirements.md } board_seed: { kind: file, path: fixtures/board.kicad_pcb } eval_matrix: { kind: file, path: fixtures/eval-matrix.json } tool_failure: { kind: file, path: fixtures/tool-failure.json } active_skill_seed: { kind: file, path: fixtures/active-skill.md } design_intent: { kind: file, path: release/design-intent.json } source: { kind: file, path: release/board.kicad_pcb } step: { kind: file, path: release/board.step } drawing: { kind: file, path: release/drawing.pdf } render: { kind: dir, path: release/render } drc: { kind: file, path: release/drc.txt } simulation: { kind: file, path: release/simulation.json } visual_critique: { kind: file, path: release/visual-critique.json } mechanical_critique: { kind: file, path: release/mechanical-critique.json } cad_critique: { kind: file, path: release/cad-critique.json } dossier: { kind: file, path: release/dossier.json } presentation: { kind: file, path: release/presentation.pdf } skill_candidate: { kind: file, path: release/skill-candidate.md } skill_benchmark: { kind: file, path: release/skill-benchmark.json } active_skill: { kind: file, path: release/active-skill.md } g6_acceptance: { kind: file, path: release/g6-acceptance.json } release_manifest: { kind: file, path: release/manifest.json } rules: - id: g0_capture_requirements in: [requirements] out: [design_intent] run: >- jq -n --arg digest "$(cksum in/requirements | cut -d' ' -f1)" '{gate:"G0",status:"pass",board_mm:[40,30],requirements_checksum:$digest,evidence_level:"workflow_qualification"}' > out/design_intent - id: g1_generate_source in: [design_intent, board_seed] out: [source] run: "cp in/board_seed out/source" - id: g2_export_step in: [source] out: [step] run: "cp in/source out/input.kicad_pcb; kicad-cli pcb export step --force --board-only --output out/step out/input.kicad_pcb >/dev/null" - id: g2_export_drawing in: [source] out: [drawing] run: "cp in/source out/input.kicad_pcb; kicad-cli pcb export pdf --mode-single --layers F.SilkS,Edge.Cuts --output out/drawing out/input.kicad_pcb >/dev/null" - id: g2_render_board in: [source] out: [render] run: "mkdir -p out/render; cp in/source out/input.kicad_pcb; kicad-cli pcb render --width 800 --height 600 --side top --output out/render/top.png out/input.kicad_pcb >/dev/null; kicad-cli pcb render --width 800 --height 600 --side bottom --output out/render/bottom.png out/input.kicad_pcb >/dev/null" - id: g2_native_drc in: [source] out: [drc] run: "cp in/source out/input.kicad_pcb; kicad-cli pcb drc --severity-all --exit-code-violations --refill-zones --output out/drc out/input.kicad_pcb >/dev/null" - id: g2_simulate in: [design_intent] out: [simulation] run: >- printf 'HG divider qualification\nV1 in 0 DC 5\nR1 in out 10k\nR2 out 0 10k\n.op\n.print op v(out)\n.end\n' > out/fixture.cir; ngspice -b -o out/ngspice.log out/fixture.cir >/dev/null; grep -q '2.500000e+00' out/ngspice.log; jq -n '{schema:"spice-evidence/v1",status:"pass",simulator:"ngspice",input_v:5,output_v:2.5}' > out/simulation - id: g3_visual_critic in: [requirements, render, drawing] out: [visual_critique] run: >- test -s in/render/top.png && test -s in/render/bottom.png && test -s in/drawing; jq -n --arg top "$(cksum in/render/top.png | cut -d' ' -f1)" --arg bottom "$(cksum in/render/bottom.png | cut -d' ' -f1)" --arg drawing "$(cksum in/drawing | cut -d' ' -f1)" '{critic:"visual",independent:true,status:"pass",top_checksum:$top,bottom_checksum:$bottom,drawing_checksum:$drawing}' > out/visual_critique - id: g3_mechanical_critic in: [requirements, step] out: [mechanical_critique] run: >- grep -q 'ISO-10303-21' in/step; jq -n --arg step "$(cksum in/step | cut -d' ' -f1)" '{critic:"mechanical",independent:true,status:"pass",step_checksum:$step}' > out/mechanical_critique - id: g3_cad_critic in: [requirements, source, drc, simulation] out: [cad_critique] run: >- grep -Eq '0 (DRC violations|条违规项)' in/drc; test "$(jq -r '.status' in/simulation)" = pass; jq -n --arg source "$(cksum in/source | cut -d' ' -f1)" '{critic:"cad",independent:true,status:"pass",source_checksum:$source,drc:"native-zero",simulation:"pass"}' > out/cad_critique - id: g4_assemble_dossier in: [design_intent, visual_critique, mechanical_critique, cad_critique] out: [dossier] run: >- jq -n --slurpfile intent in/design_intent --slurpfile visual in/visual_critique --slurpfile mechanical in/mechanical_critique --slurpfile cad in/cad_critique '{gate:"G4",status:"pass",intent:$intent[0],critics:[$visual[0],$mechanical[0],$cad[0]]}' > out/dossier - id: g4_render_presentation in: [dossier, tool_failure] out: [presentation] run: >- test "$(jq -r '.inject_presentation_failure' in/tool_failure)" = false || exit 75; mkdir -p out/rendered; printf '

HG CAD Release

G0-G4 evidence complete. Three independent critics passed.

' > out/release.html; soffice --headless --convert-to pdf --outdir out/rendered out/release.html >/dev/null; cp out/rendered/release.pdf out/presentation - id: g5_derive_skill_candidate in: [dossier] out: [skill_candidate] run: using: codex model: gpt-5.6-luna reasoning_effort: none command: >- Use shell commands only, never apply_patch. You must execute exactly this command and do nothing else: printf '# Candidate CAD Skill\n\nAdds transcript wording but no new frozen-case capability.\n' > out/skill_candidate - id: g5_benchmark_skill in: [skill_candidate, eval_matrix] out: [skill_benchmark] run: >- jq -n --argjson baseline "$(jq '.active_skill_score' in/eval_matrix)" '{schema:"cad-skill-eval/v1",frozen_cases_passed:5,candidate_score:$baseline,improved:false,promotion:"suppress"}' > out/skill_benchmark - id: g5_select_active_skill in: [active_skill_seed, skill_candidate, skill_benchmark] out: [active_skill] run: >- test "$(jq -r '.promotion' in/skill_benchmark)" = suppress; cp in/active_skill_seed out/active_skill - id: g6_human_acceptance in: [dossier, presentation, skill_benchmark, active_skill] out: [g6_acceptance] run: { using: human, command: "Accept or reject G6 release evidence from an exact JSON file" } - id: finalize_release in: [source, step, drawing, render, drc, simulation, visual_critique, mechanical_critique, cad_critique, dossier, presentation, skill_benchmark, active_skill, g6_acceptance] out: [release_manifest] when: "test \"$(jq -r '.decision' g6_acceptance)\" = accept" run: >- jq -n --arg source "$(cksum in/source | cut -d' ' -f1)" --arg step "$(cksum in/step | cut -d' ' -f1)" --arg drawing "$(cksum in/drawing | cut -d' ' -f1)" --arg render_top "$(cksum in/render/top.png | cut -d' ' -f1)" --arg render_bottom "$(cksum in/render/bottom.png | cut -d' ' -f1)" --arg presentation "$(cksum in/presentation | cut -d' ' -f1)" '{schema:"cad-release/v1",gate:"G6",decision:"accept",evidence_level:"workflow_qualification",source_checksum:$source,step_checksum:$step,drawing_checksum:$drawing,render_top_checksum:$render_top,render_bottom_checksum:$render_bottom,presentation_checksum:$presentation,simulation:"pass",critics:["visual","mechanical","cad"],skill_promotion:"suppressed"}' > out/release_manifest